From Groundwork to Grand Reveal: The Full Construction Process at AGC Home Remodeling
- AGC Home
- 12 minutes ago
- 5 min read
Whether you're planning a new custom home, expanding with a thoughtful addition, or remodeling a beloved space, the process can feel overwhelming—unless you’re working with the right team. At AGC Home Remodeling, building out of Austin, TX, we’ve developed a step-by-step process to ensure your construction project is efficient, transparent, and successful from start to finish.
Here’s a look at how we bring your vision to life.

1. Pre-Start Site Walkthrough & Planning
Before a single hammer swings, we begin with a comprehensive site walkthrough. For remodels or additions, we inspect the existing home’s structure, layout, and mechanical systems. We take photos, measurements, and document current conditions that could impact construction.
We also review our Pre-Construction Checklist, which covers:
Access points for crews and materials
Safety considerations
Permit status
Utility connections
Scheduling expectations
This step ensures that both our team and our client are fully aligned before we break ground.

2. Site Preparation
Next, we prepare your property for work. This may include:
Installing temporary fencing or safety signage
Setting up dumpsters and portable toilets
Protecting trees, landscaping, or adjacent structures
Establishing access routes for trucks and equipment
A clean, safe site is essential for smooth progress and code compliance.

3. Demolition, Grade Work, Foundation & Rebar
For remodels or tear-downs, we begin by carefully removing any existing structures or interior finishes. We then complete grading work to ensure proper drainage and elevation.
Once the site is prepped, we form and reinforce the foundation, laying out rebar per engineered plans. We take care to:
Ensure correct depth and alignment
Install post-tension or conventional rebar systems
Maintain a clean foundation area before inspections
4. Inspections: Foundation, Electrical & Plumbing Pre-Pour
Before concrete is poured, we coordinate all necessary pre-pour inspections:
Foundation Inspection: Verifies dimensions, footings, rebar placement
Electrical Pre-Pour: Checks for conduit, grounding, and slab penetrations
Plumbing Pre-Pour: Confirms waste and water line layout beneath the slab
These inspections help catch potential issues early and keep your project on schedule.

5. Framing
Once the slab is poured and cured, framing begins. This phase builds the structural skeleton of your home:
Floor systems (if applicable)
Walls, sheathing, and support beams
Roof trusses or rafters
We follow architectural drawings and local codes to the letter. By the end of this phase, you’ll see your home take shape in three dimensions.

6. Window Installation
We install energy-efficient, code-compliant windows at this stage to enclose the home and begin “drying in” the structure. Proper flashing and sealing techniques are used to prevent air or water leaks.

7. Electrical, Plumbing & Mechanical Rough-Ins
Now that the frame is up and enclosed, we run:
Electrical wiring, boxes, and panels
Plumbing supply and drain lines
HVAC ductwork, returns, and air handler setups
All of these systems are laid out behind the walls and must pass code inspections before we can insulate.

8. Inspections: Framing, Electrical, Plumbing & Insulation
We coordinate with local inspectors for:
Framing inspection
Electrical rough-in
Plumbing rough-in
Mechanical/HVAC rough
Insulation inspection
Our team ensures all trades are aligned and the project is clean and ready before inspections. Only once approved can we move to drywall.
9. Drywall Installation
Drywall (sheetrock) is hung, taped, mudded, sanded, and primed. This is the first time the interior begins to feel like a finished home. Attention to detail here prevents problems down the line with paint, tile, or cabinetry alignment.

10. Interior Finishes: Cabinetry, Countertops, Tile, Flooring
With the bones complete, we move into finish work:
Cabinets are installed to exact measurements
Countertops are templated and later installed
Tile work is laid out precisely—especially in wet areas
Flooring (wood, vinyl, carpet, etc.) is installed with transitions accounted for
This stage combines form and function—and is often the most exciting for homeowners to see progress.

11. Trim-Outs: Plumbing, Electrical, HVAC
Now we install all final fixtures:
Light fixtures, switches, and outlets
Sinks, faucets, and toilets
Vents, thermostats, and HVAC grills
These elements bring the systems to life and get us closer to move-in ready.
12. Painting: Interior & Exterior
Our professional painters use high-grade materials to deliver a clean, consistent finish. We:
Protect surfaces and prep thoroughly
Prime and paint in the right conditions
Apply your chosen palette both inside and out
This step brings color and warmth to your home.

13. Hardware & Details
We add the final layer of refinement:
Door handles and locks
Cabinet hardware
Mirrors, shelving, and bathroom accessories
These small touches complete the design and personalize the space.
14. Landscaping (If Applicable)
If your project includes landscaping, we execute the plan with:
Planting and irrigation
Walkways or patios
Sod or mulch installation
Curb appeal matters, and we make sure the exterior looks just as good as the interior.
15. Pre-Final Walkthrough
Before we hand over the keys, we conduct a pre-final walkthrough with our internal team and then with you. This allows us to:
Note any touch-ups or corrections
Confirm punch list items
Ensure systems are working properly

16. Final Walkthrough & Handover
You join us for the final walkthrough, where we:
Demonstrate systems and controls
Review warranties and documentation
Celebrate the completion of your project
Only when you’re fully satisfied do we consider the job done.



Why Clients Choose AGC Home Remodeling
We’re not just builders—we’re partners in creating your ideal space. Our process combines transparency, precision, and professionalism, backed by years of experience in the Austin area.
📍 Serving Austin, TX & surrounding communities📞 Schedule your consultation today🌐 Visit: www.agchomeremodeling.com